//==============================================================================
//
// Title:		ZTDR Changelog
// Release:		2.0.4 (06/29/2016)
// Purpose:		ZTDR driver module and DLL functionality (v2.x.x)
//
// Copyright:	(c) 2016, HYPERLABS INC. All rights reserved.
//
//==============================================================================


VERSION 2.0.5 (07/11/2016)
  * CHANGE: improved debug and error codes for startup errors
  * BUGFIX: fixed additional uncommon, intermittent error initializing device at startup

VERSION 2.0.4 (06/29/2016)
  * BUGFIX: fixed additional uncommon, intermittent error initializing device at startup

VERSION 2.0.3 (06/29/2016)
  * BUGFIX: fixed uncommon, intermittent errors initializing device at startup

VERSION 2.0.2 (12/30/2015)
  * BUGFIX: fixed error where V/C didn't update upon change of Dielectric K


VERSION 2.0.1 (10/28/2015)
  * FEATURE: multithreading support for more responsive user interface, data acquisition
  * FEATURE: added a status LED above the Program Log to indicate an active acquisition or calibration in progress.
  * CHANGE: removed option to disable auto-calibration. With multithreading, there is no performance tradeoff, so it has been permanently enabled.
  * CHANGE: removed "CLEAR" button for removing stored waveform; access now only through "File" menu
  * CHANGE: consolidated "Data" menu into "File" menu


VERSION 1.1.2 (01/13/2015)
  * BUGFIX: fixed glitch in displaying waveform in Ohms when DUT is in open
  * BUGFIX: correctly scale startup window to stored environment values

VERSION 1.1.1 (11/03/2014)
  * TUNING: improved calculation of data point (step) intervals


VERSION 1.1.0 (09/30/2014)

  * FEATURE: Set horizontal refrence (zero) on demand
  * FEATURE: Save/load program settings on demand
  * FEATURE: Remember program environment state on software restart
  * FEATURE: Show V/C as well as dielectric constant K

  * BUGFIX: Acquisition window was resetting to default width on X Unit change

  * DLL: Functionality for vertCal, setRefX (see DLL documentation)


VERSION 1.0.3 (09/18/2014)
  
  * BUGFIX: Cursor readings were not updating automatically upon re-position in manual acqusition mode.